Traction motors are designed for continuous operation and also momentary over-loads and have high starling torque. Oversized brushes result in high brush life and the brushes are easy to replace. Terminals are of extruded brass or copper.
| Power(KW) | Voltage | Speed(RPM) |
|---|---|---|
| 1.5 to 4 | 12V - 24V | 1500 to 4500 |
Type: Series Wound Motor
Protections: IP-44, IP-20, S2-S3 Duty Cycle
| Power(KW) | Voltage | Speed(RPM) |
|---|---|---|
| 1.5 to 4.5 | 12V - 24V - 36V - 48V | 1500 to 4500 |
Type: Compound, Series, Shunt
Protections: IP-44, IP-20, S2-S3 Duty Cycle
| Power(KW) | Voltage | Speed(RPM) | D |
|---|---|---|---|
| 1.5 to 4 | 12V - 24V - 36V - 48V |
1500 to 4500 | 180 |
| 3 to 13 | 192 |
Type: Compound, Series, Shunt
Protections: IP-44, IP-20, S2-S3 Duty Cycle
Pump Mounting
Brake
Thermal Switch Protection
Special Shaft
Special Mounting